Viconics VT8300 Low Voltage User Interface Guide Manuale Utente Scaricare il pdf (Pagina 11)

VT8300 Series

User Interface Guide

028-0427-01 www.viconics.com | sales@viconics.com November 2014

Previous Next

Page Page

Com address

ZigBee Pan ID

1/2 ZigBee Network

ZigBee channel

0x0000

ZigBee short

0x0000

IEEE address

No NWK

ZigBee status

254

Change Value

Down.

Only last 4 digits in HEX show

ZigBee® Pro short address. The address is generated

once the device joins a ZigBee® network

ZIGBEE PRO NETWORK SETTINGS

ZigBee Pro set-up screen shows when a ZigBee card is detected in the model. Select the desired parameter and

use the up or down arrow to set the parameter to the desired value.

Status of controller detecting a ZigBee®

network. Shows Online when successfully connected

to a network.

Back to Setup Page

PARAMETER DETAILS

Conﬁguration Parameters Default Value Signiﬁcance and Adjustments

Com address

Terminal Equipment

Controller networking address

Default value = 254

Range value = 0 - 254

Communication Address

For wireless models, the use of COM address is not mandatory.

The extended IEEE ZigBee® node address is used to identify the

device on the network.

The COM address is an optional way to identify a device on the

network.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Nessun commento

Viconics VT8300 Low Voltage User Interface Guide Manuale Utente Pagina 11