Viconics VT8300 Low Voltage User Interface Guide Manuale Utente Scaricare il pdf (Pagina 31)

VT8300 Series

User Interface Guide

028-0427-01 www.viconics.com | sales@viconics.com November 2014

2/2 Setpoints

Max. heating

Min. deadband

Default heat

1.5 °C

32.0 °C

12.0 °C

50.0 %RH

22.0 °C

Min. cooling

Dehumidify

SETPOINT SETTINGS 2/2

Parameter only displayed on

models with built in humidity

sensor.

SETPOINT PARAMETER DETAILS

Conﬁguration Parameters Default Value Signiﬁcance and Adjustments

Default heat

Default value: 22.0 °C (73 °F)

Default Heat

Used for hospitality applications in stand-alone mode only. When devices

are in deep unoccupied mode, any movement detected

by PIR resets actual occupied set points to fresh room default setting.

Default setpoint is used to write to Heating setpoint when thermostat

goes to Unoccupied mode.

Cooling setpoint is set according to Min. deadband; 18.0 to 26.5 °C (65

to 80 °F).

Parameter is only used when Stand-by mode = Rel.

Min. deadband

Default value: 1.5 °C (3 °F)

Minimum Deadband

Minimum deadband value between heating and cooling setpoints

applied only when any setpoints are modiﬁed.

Range: 1.0 to 2.5 °C, 0.5 °C increments (2, 3, 4 or 5 °F, 1.0 °F

increments).

Max heating

Default value: 32 °C (90 °F)

Maximum Heating

Maximum occupied and unoccupied heating setpoint adjustment.

Range: 4.5 to 32.0 °C (40 to 90 °F).

Min. cooling

Default value: 12.0 °C (54 °F)

Minimum Cooling

Minimum occupied and unoccupied cooling setpoint adjustment.

Range: 12.0 to 37.5 °C (54 to 100 °F).

Dehumidify

Default value: 50% RH

Dehumidify

Used only if dehumidiﬁcation sequence is enabled:

Range is: 30-95% RH (models with humidity sensor only).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 44 45

Commenti su questo manuale

Nessun commento

Viconics VT8300 Low Voltage User Interface Guide Manuale Utente Pagina 31

Commenti su questo manuale

Prodotti e manuali riguardandi Per casa Viconics VT8300 Low Voltage User Interface Guide