Viconics VT8600 User Interface Guide Manuale Utente Scaricare il pdf (Pagina 10)

VT8600 SeriesUser Interface Guide

Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I +1 514 321 5660

028-0441-00 www.viconics.com November 2014

Previous Next

Page Page

Com address

ZigBee Pan ID

1/2 ZigBee Network

ZigBee channel

0x0000

ZigBee short

0x0000

IEEE address

No NWK

ZigBee status

254

Change Value

Only last 4 digits in HEX shown

ZigBee® Pro short address. The address is generated

once the device joins a ZigBee® network

ZIGBEE PRO NETWORK SETTINGS

The ZigBee Pro set-up screen shows when a ZigBee card is detected in the model. Select the desired parameter and use up or down

arrows to set the parameter to the desired value.

Status of controller detecting a ZigBee®

network. Shows Online when successfully connected

to network

Back to Setup Page

PARAMETER DETAILS

Conﬁguration Parameters Default Value Signiﬁcance and Adjustments

Com address

Terminal Equipment

Controller networking address

Default value: 254

Range value: 0 - 254

Communication Address

For wireless models, the use of COM address is not mandatory.

The extended IEEE ZigBee® node address is used to identify the

device on the network.

The COM address is an optional way to identify a device on the

network.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Nessun commento

Viconics VT8600 User Interface Guide Manuale Utente Pagina 10