Viconics VT8600 User Interface Guide Manuale Utente Scaricare il pdf (Pagina 7)

VT8600 Series

User Interface Guide

Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I +1 514 321 5660

028-0441-00 www.viconics.com November 2014

WIRELESS ECOSYSTEM

When wireless sensors are set up to communicate with a room controller, the functioning of each such sensor is described in a separate

Zone screen, up to a maximum of 10 Zones. Select the appropriate type of sensor based on the required functioning using the up and

down arrow keys.

Set function to

Status

1/10 Zone

Battery

Paired

0x0000

IEEE address

None

Closed

Normal

Permit join

Set function to

Status

10/10 Zone

Battery

Paired

0x0000

IEEE address

None

Closed

Normal

PARAMETER DETAILS

Conﬁguration Parameters Default Value Signiﬁcance and Adjustments

Set function to

Describe function of speciﬁed wireless sensor

Default value: None

None: No sensor function conﬁgured for this zone

Door: Sensor is a door contact switch

Window: Sensor is a window contact switch

Motion: Sensor is a motion sensor

Status: Updates the BACnet status of the sensor, but no action is

taken by the internal logic of the controller.

Remove: Selecting this function clears the zone of the settings for

the attached sensor. However, the sensor will automatically try to

reconnect with the room controller unless it is manually reset as

well.

Status

Current status of information received from the sensor

Read only

Close: Sensor in closed state (door/window only)

Open: Sensor in opened state (door/window only)

No motion: Sensor detects no motion (motion sensor only)

Motion: Sensor detects motion (motion sensor only)

None: No status information received from sensor.

Battery

Current status of sensor battery, if any.

Read only

Low: Battery power level is low, replacement or recharge will be

needed soon

Normal: Battery power level is in the normal range, replacement or

recharge is not currently needed.

None: Sensor does not use a battery

Paired

Sensor pairing state

Read only

No: Sensor is not paired with the room controller

Yes: Sensor is paired with the room controller

Invalid: Sensor cannot be paired.

Identical to ZigBee

settings display

parameter, see

page 12

1 2 3 4 5 6 7 8 9 10 11 12 ... 46 47

Commenti su questo manuale

Nessun commento

Viconics VT8600 User Interface Guide Manuale Utente Pagina 7

Commenti su questo manuale

Prodotti e manuali riguardandi Per casa Viconics VT8600 User Interface Guide